The cost of the heat, air conditioning and water supply to your Denver home continues to rise – it’s no wonder you want to cut your bills so much. Here are a few simple energy and water saving tips to make your life easier.
- Patching Leaks – Two of the biggest wasters of water are dripping faucets and leaky pipes. The amount of water wasted by a single drip every second could provide for multiple baths per year – it adds up fast. Not only are leaky faucets and pipes easy to fix; they tend to develop into bigger problems as time passes.
- Drains and Flushing – If you put a piece of toilet paper in the toilet used to clean an eye or wipe the counter, don’t flush. It’s a waste of water. If you notice some extra toothpaste in the sink, don’t rinse yet. You can always use the water from brushing your teeth or washing your face to clean it out. Multi-task and minimize how much water goes down the drain to save water.
- Fully Loaded – A partially filled washing machine or dish washer is a huge waster of water. Fill it up and wait to run the device until it’s at the brim – the same amount of water is used no matter how much is in the device.
- Insulate Pipes – Hot water pipes without insulation waste a tremendous volume of energy every year. The cost of running a hot water tank continuously every day can be quite expensive,
- even with insulation. Consider the cost without it to keep the water warm as it passes to your fixtures.
- Lower Water Flow – Don’t crank your faucets up to the max just to get a glass of water or to check for hot water. It’s a waste of energy and it’s often unnecessary, especially when waiting for water to hit the right temperature.
If you’re interested in getting the most out of your home’s water supply, there are hundreds of little ways to save water that will add up over time. These are just some of the easiest ways to get started. For more tips on how to upgrade your Denver plumbing, give Bell Plumbing and Heating a call today!
